Future Technology Devices International (FTDI) today announced the availability of two evaluation modules to support their recently announced FT2232H and
FT4232H USB 2.0 High Speed devices, which have the capability of being configured in a variety of industry standard serial or parallel interfaces such as
UART or FIFO. The module PCB measures just 36mm (L) x 30mm (W) x 12mm (H–including connector pins). Each module provides access to all the required
signals through two 26 way (2 rows, 0.1” pitch) male headers measuring 32.9mm x 5.08mm. The pin length is 6mm. The FT2232H_mini-module provides two independent configurable interfaces while the FT4232H_mini_module offers four such channels.

Datasheets: FT2232H and FT4232H

While including all the attractive features of the EZRadio® products such as high integration, low cost, flexibility, low BOM, and easy design-in, these parts are targeted to more sophisticated applications and offer several enhanced parameters and features, including continuous frequency coverage from 240 - 960 MHz, and output power up to
+20 dBm. Also included are built-in features like wake-up timer, low battery detector, transmit and receive data FIFOs, power-on reset circuit, and general purpose digital I/Os.

EZRadio and EZRadioPRO Wireless Solutions

SiTime, the leader in MEMS-based silicon timing solutions, introduced a new family of programmable oscillators that are designed to extend battery life in portable and consumer electronics by delivering the industry’s lowest power consumption and fastest start-up time. These devices are highly programmable – with frequencies, voltages and tolerances that can be configured easily – enabling shipment of customized samples in 24 hours and production quantities in two weeks. Additionally, the oscillator packages have standard footprints and can be used as drop-in replacements for quartz devices. 

The first three solutions in this product family include: 

•SiT8003 – a low power programmable oscillator;
•SiT8003XT – the world’s thinnest programmable oscillator at 0.25mm; and
•SiT8033 – a two-frequency, low power programmable oscillator.

CoreSolid Storage introduces the Gaia Disk-on-Module (DOM) series for industrial storage solutions, including 40pin & 44pin PATA, USB, and industrial CF specifications to match the needs of customers. The Gaia product family takes advantage of SLC chips with high stability and performance with capacity of up to 16GB. The advanced static wear-leveling algorithm and ECC technology ensures the high stability and reliability of these DOM products. CoreSolid Storage also provides customized services to match different needs.

Read more

The XS1-G4 has four XCore tiles with up to 32 software threads, 1600 total MIPS and 256 KBytes of single cycle memory. This programmable device is capable of implementing multiple interfaces, data processing and integrated software stacks.

Product Brief

1/ MiniCore RCM5700 Deluxe Development kit @ 99 EUR

Small foot print and very low profile
The new Rabbit MiniCore product family offers a new PCI Express form factor that delivers Rabbit 5000 microprocessor capability in a small, low-profile form factor at a dramatically low price.

2/ MiniCore RCM5700 Standard Development kit @ 49 EUR

Small foot print and very low profile
The new Rabbit MiniCore product family offers a new PCI Express form factor that delivers Rabbit 5000 microprocessor capability in a small, low-profile form factor at a dramatically low price.

3/ RCM5400W Development Kit @ 125 EUR

Advanced Wi-Fi Connectivity
* Integrated Wi-Fi 802. 11b/g wireless connectivity
* Up to 39 general-purpose I/O lines configurable
* Ready-to-run / ready-to-program core module

Prices valid until end of Feb. 2009

The SocketModem® HSDPA wireless modem is a complete, ready-to-integrate communications device that offers standards-based tri-band UMTS/HSDPA performance.  This quick-to-market communications device allows developers to add wireless communication to products with a minimum of development time and expense.  The SocketModem HSDPA wireless modem is based on industry-standard open interfaces and utilizes Multi-Tech's universal socket design.

Universal Socket Benefits:

• Interchangeable communications devices
• Quick-to-market
• Global Approvals
• Easy migration to future networks

Datasheet

This LCD module has a TFT active matrix type liquid crystal panel 1366x768 pixels, and diagonal size of 42.0 inch. It supports 1366x768 XGA-Wide modes (Non-interlace).  Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes. Gray scale or the brightness of the sub-pixel color is determined with a 8-bit gray scale signal for each dot. 
The G420XW02 V0 has been designed to apply the 8-bit 1 channel LVDS interface operation. It is intended to support displays where high brightness, wide viewing angle, high color saturation, and high color depth are very important.

Specifications

With the high resolution and high density channels of the PXI-9816/26/46 series, they are very suitable for applications such as IF signal, radar, Lidar, ultrasonic imaging, non-destructive testing, etc.  
ADLINK PXI-9816/26/46 digitizers are high resolution digitizers with three characteristics that make them optimized for various applications – high accuracy, low noise and high dynamic performance over wide range of frequency domain. For example, typical dynamic performance for PXI-9816 includes 12.6-bit effective number of bits (ENOBs) and 78.4dBc signal-to-noise ratio (SNR) at an input frequency of 1MHz sine wave.

Benefit from PXI’s architecture, engineers can synchronize multiple PXI-98x6 digitizers to build systems up to 72 channels in a single 19-slot PXI chassis; all channels are sampling simultaneously and synchronized to each module. Each PXI-9816/26/46 digitizers have a built-in memory up to 512Mbytes for massive data storage, this feature allows user to extend the acquisition period for a certain time.

For software support of PXI-9816/26/46 digitizers, ADLINK provides traditional WD-DASK and DAQPilot task-oriented driver/SDK. WD-DASK provides traditional way to develop API-based applications. DAQPilot provides complete SDKs include API, ActiveX controls, .NET assembly, Express VI and Polymorphic VIs.

Datasheet

SCHURTER now offers radial leaded varistors, also referred to as MOV (Metal Oxide Varistors), which help protect electronic circuits against surge transients, such as can be caused by lightning strikes and switching of contacts and inductive loads. Varistors are suited to a wide variety of applications including switching mode power supplies, ballasts and motor protection used in areas such as industry, telecom and medical technology as well as in consumer goods.

There are different types for various applications fields available: AVTS for secondary protection, AVTP for primary protection, and AVTT for 3-phase applications. The varistors, all approved according to IEC 61051, UL 1449, UL 1414 as well as CSA C22.2 and conforming to RoHS regulations, are available in plastic bags, taped and reeled and in ammo packaging.

Product Overview

13.84mm is the dimension from the front shell to the first pin row of the new series 104. With the long style footprint the company completes the standard D-Sub-portfolio of EU and US footprints. The long style series offers right-angled D-Subs in male and female configuration with 9 to 37 contacts. The contacts consist of copper alloy, and they are designed for a current rating of 5A. The insulator body consists of UL94 V-0 rated high temperature thermoplastic. The insulation resistance measures a minimum of 1000 MOhms with a test voltage of 500VDC, the contact resistance is a maximum of 30 MOhms. The solderability is guaranteed according to IEC 512-12A. The connectors will operate in a temperature range from -55 to +105°C.

Datasheet

ACuQor units measure just 3.6 x 5.25 x 1.63" x 5 x 1U, which the company claims makes them the highest power density medical PSUs available. Primary output options are 12/24/36/48V semi-regulated outputs and include regulated 5V (10W) and 12V (50W) ’always on’ standby outputs. ACuQor PSUs feature a universal (85-264Vrms) input range, active power factor correction and very high efficiency – up to 90% for the 48Vout model at 500W. ACuQor supplies meet EN-61000-3-2 for PFC and EN60601-1 Low Leakage Current, along with EN55011/EN55022 Class B compliance for radiated & conducted emissions out of the box. In addition, the devices provide: Over-current, Over-voltage, and Over-temperature protection; DC Power Good; AC Power Good signals; and Remote enable and Fan status/enable functionality.

Datasheet

• Safety transformer
• nach EN 61558
• UL 506 / CSA
• Temperature class ta 70° C/B
• IP00
• Thermoswitch 120°C
• CLASSE B
• free ends  130mm lengths

Datasheet