Atmel's SAM3U series is the world's first 32-bit ARM Cortex M3 Flash microcontroller with high-speed 480 Mbps USB + Phy.

High-Speed USB
The SAM3U is the first Cortex M3 microcontroller with high-speed USB and an integrated transceiver for fast up/downloading of data, robust EMI tolerance, and plug-and-play high-speed serial interconnectivity. 
High Performance
Features a 96 MHz maximum operating frequency and a high data-bandwidth architecture based on a 5-layer bus matrix with 22 DMA channels and distributed memory. 
Dual-Bank Flash
Provides safe in-application programming (IAP) including the boot program.
1.62 to 3.6V Operation
True 1.8V±10% operation extends device operation when running from two AA alkaline batteries. 
Memory Protection Unit
Improves code protection and secures multi-application/task execution. 
High-End Analog
Features a differential input and programmable gain amplifier (PGA) on a 12-bit 1 Msps ADC.

Datasheet: ATSAM3U

AnalogicTech introduced a set of flash and backlight White LED (WLED) drivers for the highly competitive feature phone market.  Offering new efficiencies in power usage in highly compact packages, the AAT3176 flash driver and the AAT3351 WLED driver help handset designers extend battery life and reduce product footprint.
Operating from a 2.7V to 5.5V input voltage, the AAT3176 flash driver IC supplies up to 500mA output current. The dual mode charge pump maximizes power efficiency by supporting both 1X and 2X operation and can be programmed across 16 distinct steps via AnalogicTech’s patented S2Cwire™ (Simple Serial Control) interface. Delivered in the industry’s smallest package for a 500mA flash driver IC – 20% smaller than comparable devices – the AAT3176 allows to build highly compact camera lighting solutions. 
Datasheets:AAT3351, AAT3176

Silabs introduced the C8051T606 OTP MCU - its high level of integration makes it an optimal solution in applications such as communications bridges, LED lighting and system supply supervisors.  The world’s smallest MCU, it is a mixed-signal device that provides a high degree of functional density for programmable embedded.

Features:

• 25 MIPS 8051 CPU
• 8, 4, 2 or 1.5 kB one time programmable (OTP) code memory
• 56 or 128 B RAM 
• 10-bit ADC 
• Up to 8 digital I/O, 5 V tolerant 
• 1.8–3.6 V supply
• –40 to 85 ºC operating range
• On-chip debug
• 11-pin QFN (3x3 mm)
• 14-pin SOIC
• 10-pin QFN
• (2x2 mm)
• 10-pin MSOP
  

Datasheet: C8051T606

The Si84xx ISOpro digital isolator family supporting as many as six unidirectional isolation channels capable of data rates up to 150 Mbps. Offering space-efficient packaging options, a choice of isolation ratings up to 2.5 kVRMS and the industry's most highly integrated I2C isolators, the ISOpro family delivers unsurpassed system design flexibility for use in applications such as power supplies, motor control systems, hybrid electric vehicles, industrial networking, medical and consumer products.

Datasheet Si84xx

CML introduced a high performance integrated RF quadrature/low IF transceiver IC, which features an advanced image-reject up-conversion modulation system and flexible superheterodyne receiver.  The new CMX991 is designed to meet the global requirements of electronics designers, who are searching for a low cost integrated transceiver device, which offers consistently precise RF signal processing. Specifically tailored for flexible operation from 1GHz right down to 100MHz, the transceiver addresses an area that is not adequately covered by existing devices on the market.
Datasheet: CMX991

The SocketModem® Cell wireless modem is a complete, ready-to-integrate communications device that offers standards-based quad-band GSM/GPRS Class 10 performance. This quick-to-market communications device allows developers to add wireless communication to products with a minimum of development time and expense. The SocketModem Cell wireless modem is based on industry-standard open interfaces and utilizes Multi-Tech's universal socket design.

Key Features:
•          GPRS Class 10
•          Quad-band GSM 850/900/1800/1900 MHz
•          Packet data up to 85.6K bps
•          Universal socket connectivity
•          Circuit-switched data up to 14,400 bps transparent and non-transparent
•          Short Message Services (SMS)
•          Advanced management features include phone book management, fixed dialing number, real time clock and alarm management
•          UFL antenna connector and SIM socket
•          Serial interface supports DTE speeds to 115.2K bps
•          AT command compatible
•          MNP 2 error correction, V.42bis compression
•         Two-year warranty
•          PTCRB certified
•         AT&T certification pending (expected end of August)

Datasheet: SocketModem Cell

The Digi Connect WAN 3G IA provides support for both HSDPA and EVDO connections and features Class 1 Division 2 industrial certification.  It also includes Modbus TCP support for easy connectivity to programmable logic controllers, Remote Terminal Units and other industrial devices.  Additionally, the Digi Connect WAN 3G IA includes both Ethernet and serial ports, a terminal block for 9-30 VDC power, a din rail kit for mounting in industrial environments, and an industrial temperature rating of -25 to 75° C for GSM models and -30 to 75° C for CDMA models.

Product Datasheet
Digi Connect WAN features comparison chart

The Cool XpressRunner-GS45 is the fastest PCI/104-Express processor module available. It brings the power of the Intel Core 2 Duo processor and the mobile GS45 chipset on a small 3.55” by 4.55” PCI/104-Express board.  The chipset features an integrated GMA4500 graphics processor. Displays are connected using either VGA or dual channel LVDS interfaces. High definition audio with analog as well as digital inputs and outputs is available, too.
There is a Gigabit LAN port, 8 USB 2.0 host port and two serial interfaces capable of RS232 and RS485. Two SATA ports round the board’s hardware features off.
All models of the Cool XpressRunner-GS45 are designed for an ambient temperature range of -20°C...+60°C. The 1GHz model is optionally available for operation in the full extended temperature range of -40°C...+85°C.

Datasheet Cool XpressRunner-GS45

All Reflex LCDs retain an image without power and offer superior optical characteristics including sunlight-readability and wide viewing angles. These features, coupled with the flexibility, durability and exceptional thinness of plastic substrates provide a more versatile, sustainable medium than traditional paper and backlit LCDs, opening the door to a myriad of new display applications from electronic paper to electronic skins – and beyond!
To manufacture plastic LCDs, Kent Displays recently installed and commissioned a new roll-to roll production line. A first of its kind in the LCD industry, the line is now in pilot production and fulfilling initial customer orders for LCD Writing Tablets. The roll-to-roll line will also produce LCDs for electronic skins, smartcards and other applications requiring flexibility, durability, and/or exceptional thinness.
Datasheet Reflex, eTablet

Improves luminous and thermal efficiency by over 20% compared to existing products by a precision dome lens on a metal substrate

Unlike existing Chip LED devices, the LCW100Z1 delivers over 120lm/W with an enhanced primary optic. Also, combined with the metal substrate, luminous efficiency is improved substantially compared to the typical Top View LED.  Enhanced heat transfer dramatically improves efficiency. The patented LCW100Z1 shows remarkable value with pricing comparable to similar-sized Chip LED’s that can tolerate only half of the current of the LCW100Z1.

As an ultra-thin LED with dimensions of 3.5mm x 2.8mm x 1.6mm, the LCW100Z1 delivers up to 7.8lm (@0.06W) at the low current of 20mA, and 14.3lm 40mA with a viewing angle of 120 degrees in cool white.  Another strength of the LCW100Z1 is that its reliability is improved by the optimized thermal design yielding the efficiency needed for indoor and outdoor lighting.

The new LCW100Z1 product comes in three ranges of correlated color temperature’s (CCT); including pure white, warm white and natural white.

Datasheet LCW100Z1

The new MSM CS metal switch from SCHURTER is equipped with an actuator made of highly durable ceramic. Ceramic is a new technology employed in the production of an electro-mechanical switch. The new switch provides novel features that open up entirely new areas of application. The MSM CS is extremely robust and meets vandal-proof demands due to the low profile of the front structure (1.7 mm), the IP 69K protection class and the high level of impact resistance. The switch is available in 19 mm and 22 mm mounting diameters.
Datasheet: MSM CS metal switch

The new connector series 829 provides data transfer rates of 4,8 Gbit/s – e.g. a speed 10 times faster than the previous USB 2.0 connectors (480Mbit/s)! The increase of the speed of the new USB 3.0 was absolutely necessary. The data transfer rate of the usually USB-operated hard discs and mass storages are already today 3 times faster than the maximum data transfer rate of USB 2.0. The higher data transfer rates are realized with a technique comparable to the PCI-Express or the Serial ATS. Therefore additional wire pairs and supplemental contacts are necessary.
W+P guarantees for the series 829 compatibility to the previous USB-headers. The 5 supplemental contacts are located in the back of the com-monly used USB connector case.
The new USB 3.0 super speed connectors are high-speed alternatives for the previously used USB 1.1 and USB 2.0 connectors. Attractive applications are e.g. in industrial controlling, embedded computing and peripherial devices. The connectors are available with 9 contacts as solder version in type A and B.
Datasheet: USB3 0-1, USB3 0-2

Seven models deliver output voltages from 12 to 56V, and up to four units can be wire-ORed together to increase the total main output power up to 1,400W. The XL375 family is designed for OEM applications such as industrial automation, telecommunications, gaming systems, security and surveillance systems, and network servers. The XL375 series delivers 375W of output power from just 16.5 square inches of system design real estate. Very low profile packaging yields more than 15W per cubic inch power density in less than 1U, making the system designer’s job much easier.

Datasheet XL375