PLX announced its entire ExpressLane™ PCIe Gen 2 switch family, ranging from four to 96 lanes, is fully compliant to support Access Control Service (ACS), which is required in PCIe switches in various I/O virtualization (IOV) applications. Virtualization allows multiple operating systems running simultaneously within a single computer to share CPU and I/O resources. ACS capability in PLX® PCIe switches prevents silent data corruption and un-intended data transfers between partitions of shared resources in virtual computing environments found in modern data centers. Virtual computing is increasingly being deployed in data centers to reduce capital expenditures and operating expenses. PLX ExpressLane™ Gen 2 PCI Express compliant Switches overview

ExpressLane™ PCI Express Gen 2 Switches offer:

- The highest performance
- Dual Cast, Read Pacing
- Lowest latency
- Lowest power consumption
- Integrated non-transparency
- Integrated Hot-Plug support
- Small flip-chip packaging 
- Highly flexible configurations up to x16

Atmel's SAM3U series is the world's first 32-bit ARM Cortex M3 Flash microcontroller with high-speed 480 Mbps USB + Phy.

• High-Speed USB
• High Performance
• Dual-Bank Flash
• 1.62 to 3.6V Operation
• Memory Protection Unit
• High-End Analog
• SAM3U-EK & Support Ecosystem
  

Product Brief

The Si590/591/595 low jitter crystal oscillators (XO)/voltage-controlled crystal oscillators (VCXO) significantly expand Silicon Labs’ oscillator portfolio to address lower frequency (<525 MHz), cost-sensitive 5x7mm XO/VCXO applications at 1 ps rms jitter performance. Based on 3rd generation DSPLL technology, the Si59x is the industry’s only XO/VCXOs offering any-rate frequency flexibility and 1 ps rms jitter performance. The Si59x supports any frequency from 10 to 525 MHz, any format (CMOS, LVPECL, LVDS, and CML), and any supply voltage (1.8V, 2.5V,3.3V).

Datasheets: Si590-591, Si595

SSDs generally feature one of two types of memory technology. The first is single-level cell (SLC) memory technology, in which one bit of data occupies one cell of the flash memory, making them optimized for performance and data reliability. The second is multilevel cell (MLC) technology, in which four bits of data occupy one cell of the flash memory. This allows for greater
capacity than SLC-type drives. However, performance of MLC-type drives, while much higher than that of traditional hard drives, drops when compared to that of SLC-type drives. Also, they are rated for fewer write cycles than SLC-type drives. With its new ZeusIOPS SSDs, STEC said it has enhanced the reliability of MLC SSDs with the introduction of MLD NAND Flash components, which the company said offer improved reliability at a significant cost savings compared to SLC memory. Brochure: Zeus SSD

A new module for supporting Wi-Fi® RTLS tags from Redpine Signals®, Inc., offers the first 802.11n single stream solution for asset tracking. Redpine’s Find-iT™ module provides all the control and wireless functionality required to build and deploy tags for advanced two-way communicating real-time location systems (RTLS) in industrial and enterprise applications. The module is also the first 802.11n solution to meet Cisco Compatible Extensions (CCX) tag specifications for system designs for the Cisco Location Solution. Redpine is a leading developer of ultra low power multi-standard OFDM and MIMO silicon-based solutions for Wi-Fi, mobile WiMAX™ and 3GPP LTE.

Productbrief: RS9110-N-11-51

Korenix JetNet 6524G is a gigabit Layer3 Managed Switch equipped with 24 full gigabit ports and 4 Gigabit SFP combo ports. Designed to meet the demands of intelligent transportation system networks, it allows managing routing between different network segments and thus improving the efficiency, safety and quality of service of the transportation system. With its 8 unit stackability, secured stack cable and 2 10G stack backplane, users can easily and flexibly expand the gigabit port volume without the necessity of environment change.

Key features of JetNet 6524G are:
 

• 24-port 10/100/1000 BaseT ports with 4 Gigabit SFP combo ports
• 2 10-G stacking CX4 connectors, up to 8 units stackable
• Support IP, VLAN & Multicast routing
• IP Routing protocol supports RIP v1 / v2, OSPF v1/v2
• Support L3 Multicast, PIM-DM and PIM-SM, DVMRP , IGMP v1/v2/v3
• Virtual Redundant Router Protocol (VRRP)
• 802.1s Multiple Spanning Tree Protocol and 802.1w RSTP
• Support 512 VLANs, GVRP/GMRP, protocol VLAN
• 802.3ad LACP, up to 6 trunk groups, unicast and multicast load balance
• Support L2 / L3 / L4 ACL (access control list)
• IEEE 802.1x Port-Based Authentication, RADIUS and TACACS client, SSH, SSL, TLS, Port binding

Datasheet

CMO's superior technology can also be seen in the special-application panels. Boasting features such as high resolution, wide operating temperature range, wide viewing angle, high contrast, quick response time and high reliability for thermal and pressure, CMO’s panels, in 7”, 8”, 10.4”, 12.1”, 13.3”, 15” and 15.4”, fit the requests for industrial, amusement, avionics, vehicle displays and other special-application requirements. In addition to CCFL backlight, a new series of LED backlight panels for special applications is developed to meet requirements for environmental conservation and energy efficiency, including the 7”, 8”, 10.4” and 12.1” . In particular, the 7” and 8” have been designed with vehicle display specification, using a LED backlight source to provide low power consumption, high efficiency and high brightness features. The 10.4” and 12.1” panels, on the other hand, have the advantage of superior high resolution XGA (1024x768) to meet a wide range of industrial requirements.

Master Chart of CMO's Special-application Panel Specifications

Features :

• Intel® Core™2 Duo/Celeron® Mobile processors in Micro-FCPGA package
• Integrated Graphics Controller, supports Dual Independent Display on VGA/LVDS
• Trusted Platform Module
• Dual Intel® Gigabit Ethernet controllers
• Optional High Definition Audio kit
• Extended temperature support (-20ºC to 70ºC)

Typical Applications:

• Industrial Factory Automation
• Medical
• Intelligent Transportation Systems
• Military Applications
• Rugged Portable Systems for in-vehicule IT
• Mobile test & measurement

Datasheet NuPRO-730
More ADLink SBC Products     

The new and highly innovative Acriche A4 product has technology that is able to satisfy both CRI and brightness. The past requirement of lowering luminous efficiency by several tens of percent is overcome by the A4. The A4 devices have a color temperature of 3000K and include multiple new technologies provide excellent efficiency of 75 lumens per watt (lm/W) with a High CRI of 85.
Alternating Current (AC) LED’s with better luminous efficiency than LED’s with Direct Current (DC) for the first time is very significant. Seoul Semiconductor stated that “with the mass production of the Acriche A4 series, we will be able to provide both high quality and normal use markets with light sources that have exceptional performance and lower prices. With the A4 series, we want to spread the name “Acriche” far and wide as the world’s best LED brand”.

DOMINANT introduced the new high intensity RGB SPNovaLED (NMRTB-USD) of its SPNovaLED series, replacing the existing NMRTB-USS device. The utilized RGB technology of this LED also allows driving each chip in the package individually to mix and match any requested color even white; to provide balanced lighting distribution. With an operating current of 250mA this LED features a typical luminous intensity of 9000mcd for Red, 18,000mcd for True Green and 4500mcd for Blue. This new RGB SPNovaLED offers an excellent lifetime due to its silicone encapsulation and low thermal resistance of the housing, converting it to an unimpeachable MultiLED product. In terms of the design and size of the package the dimensions are equal to the other SPNovaLEDs (6.0(L) x 6.0 (W) x 1.5(H) mm). However the viewing angle was designed to 125° to ensure superior color mixing among the colors. This LED is a true high intensity light
source that leverages the benefits to a greater stability and an extended lifetime.

Datasheet: SPNovaLED

The RV2123C2 has been specially designed to achieve an ultra-low power consumption of typically 130nA @ VDD 3.0V in time-keeping mode. The very small SMT ceramic-package combines the 32.768 kHz crystal unit with the CMOS-based oscillator and real-time-clock circuitry. The calendar function tracks year, month, date, and day-of-the-week with built-in century and leap-year flags. Programmable alarm setting and universal timer functions increase flexibility.

Features:
- Ultra low power consumption
- Compliant with 4-wire SPI-Bus
- Time keeping mode down to 1.1V
- Frequency-offset trimming register
- Programmable alarm, timer and interrupt

Datasheet: RV2123C2

ELMA's new encoder covers a wide field of applications including menu selection for PLC controls, control of laboratory and test devices or in defence industry systems. Each field places its own requirements on the encoder. Shaking and vibration can occur in aircraft or in machinery environments. In open-air applications, devices are exposed to extreme temperature differences, moisture ingress and, depending on the application, even sudden shock.

E33 Product Flyer

Elma Encoder Products Overview

SynQor’s new IQ64 family of industry-standard half brick dc/dc converters establishes a new performance benchmark with a super-wide 8:1 input voltage range of 18-135V, which doubles the existing ultra-wide 4:1 input ratio standard. With one converter designers can now simultaneously satisfy EN50155 requirements for 36V, 48V and 72V railway systems. The IQ64 family uses SynQor’s patented two-stage topology with a constant mid-bus voltage, which enables an optimized isolation stage design based on synchronous rectifiers, greatly reducing heat loss and achieving up to 90% efficiency at full load.

The IQ64 series further expands the InQor family of fully encased and ruggedized isolated dc/dc converters for industrial and transportation applications The half-brick format is comprised of nine output voltages, including 1.8V, 3.3V, 5V, 12V, 15V, 24V, 28V, 40V and 48V. For each output voltage there are two converters: one with a power rating in the 200W range, and a second cost-optimized unit in the 150W range for lower power requirements.

InQor DC/DC Converters Product Overview

Alcom electronics represents exclusively the EOS brand of power supplies in the Benelux. The EOS brand is recognized as the leading seller of ultra miniature, high efficiency power supplies.
The product range consists of :

• Open Frame AC/DC
  V-Series High Density Open Frame AC/DC power supplies from 40-200 Watt
• High Efficiency Medical Power Supplies
  MVLT-Series 40-200 Watt
• External High Efficiency Adapters
  Z-Series from 20-180 Watt