ATmega1284P reduces design footprint by doubling flash and quadrupling RAM size compared to existing picoPower megaAVR microcontrollers. The small 44-pin package makes the ATmega1284P ideal for applications such as wireless and ethernet nodes, home automation and other code-intensive battery or signal-line powered products, combined with its ultra-low-power consumption, 128 KB of flash and 16 KB of random access memory (RAM). The ATmega1284P is pin- and feature-compatible to the ATmega164PA, ATmega324PA, and ATmega644PA. The four devices provide a drop-in migration path from 16 to 128 KB of flash and 1 to 16 KB of RAM. The ATmega1284P consumes 100 nA in power-down mode, 700 nA in power-save mode and 0.45 mA in active mode at 1.8 V and 1 MHz. Datasheet: ATmega1284P

The Si5355/56 any-rate clock generators are the industry’s first clocks targeting cost-sensitive communications, computing and general purpose applications capable of synthesizing four completely non-integer related frequencies up to 200 MHz.  Datasheet: Si5355/56

Si5355/56 features:
* Custom Si5355 pin-controlled clocks available from www.silabs.com/ClockBuilder
* Any-rate, any-bank frequencies from 1 MHz to 200 MHz
* Single input with 8 CMOS outputs organized into 4 banks
* Independent VDDO per output eliminates external level translators (1.8, 2.5, 3.3V)
* Low period jitter:  50 ps pk-pk
* Crystal (25 or 27 MHz) or clock (5-200MHz) input
* I2C programmable (Si5356) supports spread spectrum
* Si5356 in-system, flash-based programmable w/small form factor MCU

The AAT4702 SmartSwitch™ is a member of AnalogicTech’s Application Specific Power MOSFET™ (ASPM™) product family. This device integrates a high side P-channel MOSFET current limiting load switch with a nanopower low dropout (LDO) linear voltage regulator, making the AAT4702 ideal for use in load current protected applications that also require a system power supply. The load switch operates with input voltages ranging from 2.4V to 5.5V, making it ideal for 2.5V, 3V, and 5V systems. A fault flag is provided to alert the system to an over current event. The fault flag has a 5ms blanking time to prevent from reporting false events such as inrush currents during system startup.

Product Info

Part of PLX's Expresso family of high-performance PCI Express® devices, the OXPCIe200 is a single-chip multi-port bridge with a rich set of connectivity ports and advanced system management to maximize data throughput while substantially reducing CPU and system loading.

A fully integrated, single-lane PCI Express end-point controller and SerDes enables host system to access the USB 2.0 host, SPI and SRAM ports, a PLX high-performance 950 UART, plus user-defined GPIOs/PWMs. The device operates as either dual USB 2.0 host ports or one USB 2.0 host port and one SPI or SRAM port providing a high-throughput communication path from a PCI Express host system to a slave processor or peripherals.

Oxford's complete family of Serial Bridges :

• PCI Express - Expresso family devices (3.3V)
• PCI Express to USB & UART Bridge
• PCI to Serial
• PCI to Parallel (5.0V)
• PC Card to Serial (3.3V)
• High Performance UARTs (3.3V & 5V†)

Product Brief OXPCIe200
Oxford Serial Bridges

Industry’s First 100v Breakdown Voltage ESD Solution for High Power Solid State Lighting Applications.
The new CM1771 is the industry’s first ESD protection solution for HBLED applications to feature a 100 volt breakdown voltage ESD rating. This enhanced level of ESD protection is a requirement for a growing segment of high power HBLED lighting applications that feature high output power, high efficacy levels reaching over 120 lumens per watt or those utilizing multiple HBLEDs driven in a serial arrangement. Delivering ESD protection at high operating voltages poses the new challenge of dissipating a higher level of power during an ESD strike, and also in maintaining acceptably low dynamic clamp voltages. A silicon-based, side mount protection solution with a back-to-back electrical configuration, the LuxGuard CM1771 provides robust, symmetrical ESD protection and features a very small, cost effective die that can easily be integrated into a broad range of HBLED lamp modules.

LuxGuard High Brightness LED Protection Devices

Korenix is pleased to release JetCard 2215, the Exclusive 12~24V Booster PoE Switch Universal PCI card for providing power through Ethernet to IPC devices.
In addition to 4 PoE ports, JetCard 2215 is equipped with Korenix patented 24V PoE technology – the 24V to 48V power booster, becoming an excellent solution for embedded surveillance applications in transportation systems. Moreover, designed with easy-to-install drivers and featuring -25~70°C operating temperature range, the UPCI switch board works as an embedded video server, assuring the high performance and reliable data transmission to complex networking systems in severe industrial environments. Datasheet: JetCard 2215

Key features of JetCard 2215 are:
* 5 RJ45 ports Ethernet Switch with 4-port PoE support
* Exclusive 12~24V booster for 48V PoE
* Reliable detection and connection with Auto MDI/MDI-X
* Wide operating temperature

The Jupiter3 is Navman Wireless smallest form-factor module and is the basis of Navman Wireless'next generation GPS receiver solutions. The Jupiter3, based on SiRF's GSC3f/LPx chipset, offers low power and high sensitivity at a competitive price.

The Jupiter3 is designed with low cost in mind, enabling products that have existing voltage regulation, real time clock and supervisory circuit functions. The Jupiter3 integrates select key components including TCXO, LNA and SAW filter. Offering customers the flexibility in external BoM component selection. Offering the same software messaging as the current Jupiter xLP products, Jupiter3 enables a risk free upgrade path for any customer currently using Jupiter-based products.

Key features

• 20-channel GPS receiver with 200,000 effective correlators
• Ultra low power, 11.5mA*
• High sensitivity, -159dBm
• Assisted GPS supported (SiRF InstantFix and Ephemeris Push)
• SBAS supported (WAAS, EGNOS and MSAS)
• Power saving modes supported

Product Brief

Features

• IP 65 / IP 54 rating
• IP 65 waterproof connector
• Stainless Steel Enclosure panel PC
• Support Intel Atom N270 1.6 GHz CPU
• 15" XGA (350cd/m2) TFT LCD with resolution 1024x768
• Optional resistive type touch panel
• Support 1 x PCI expansion (IP54 version only)
• Support VESA 100x200 mount
• DC 11-28V wide-range power input

Datasheet APC 3563

The 3U cPCI-3965 and 6U cPCI-6965 are low power CompactPCI blades with Intel Core 2 Duo, up to 4GB of memory, 3D-featured graphics, and dual independent VGA/DVI ports. Intel's GME965 ICH8M chipset makes these boards very competitive for factory automation, transportation, and medical applications.

Tight on space? Integrate the Reflex mini 128*32 glass LCD module into your product today!

The new Reflex 128x32 Graphic LCD Module is the latest addition to Kent's mini LCD module product line. At an overall size of just 33mm x 11mm, this low-cost glass display is perfect for devices with very small form factors or applications with very limited available space such as a USB drive or remote control. The display also features a chip on glass (COG) configuration, serial command and data interface, 118 DPI resolution and white on blue color scheme (custom colors available). Overview

DOMINANT introduces a highly reliable and impressive white SpiceLED part, the SSW-HLG. This device provides a typical luminous intensity of 500 mcd at an operating current of 20mA withstanding high operating temperatures of up to 110°C.
This miniature device uses an industrial standard 0603 (S-Spice) package outline but with a package height of only 0.6mm! Its small, efficient and highly reliable design has a superb wide viewing angle of 160° with enhanced thermal dissipation capability via its copper base. It offers an excellent lifetime up to 20k hours due to its enhanced resin mixture for encapsulation and low thermal resistance of the housing, converting it to an unimpeachable SpiceLED product.
SpiceLEDs do not only spice up the lighting solutions for automotive interior lighting but being also the trend-setter for key-pad illumination of PDAs, compact back-lighting applications, consumer appliances, office equipment, audio and video equipment where less space is a premium requirement.

Up to now, relatively high system costs have prevented the widespread industrial use of MicroTCA technology. The downsizing of some functions lowers costs and facilitates a wide range of industrial applications that previously ran on industrial PCs and single-board computers.

Product Overview

ept is extending its current product range in the area of power connectors for MicroTCA® with the MicroTCA® power input connector product group. The new product group comprises the models 7W2 and 9W4. These connectors were designed for use in 48V/60V and 24V systems. The current-carrying capacity is 24A/pin for the 7W2 and 40A/pin for the 9W4. The connectors are available as single-port or dual-port models.
They are supplemented with connectors 5W5 and 15W5, which are intended for power supplies in industrial applications, in the planed "Rugged MictroTCA™“ specification. These two connectors have been designed for 12V of supply voltage and a maximum current-carrying capacity of 40A.
 

Connectors for AdvancedTCA® and MicroTCA® systems

Red Rocket (EOS brand) is the leading power supply manufacturer when it comes to

• Customer favorite V-series 20-200W
• High Density (up to 10W per inch³)
• Full certification
• Up to 90% + efficiency permits cool designs and operations
• Small package, big power

Product Overview

The SR7805 is a family of low cost, miniature, very high efficiency switching POL regulators. These wide input, 500 mA units are "plug-in" replacements for much less efficient linear LM78xx regulators.

The SR7810 is a family of low cost, miniature, very high efficiency switching POL regulators. These wide input, 1A units are "plug-in" replacements for much less efficient linear LM78xx regulators.