APIX Industrial is a standardized Interface to connect Displays and Cameras over longer distances, fullfilling all the requirements such as high temperature, EMI robustness and longterm supply to our customers.  APIX provide a unique value for applications requiring long distance - up to 15m - transmission of uncompressed Video in realtime and full duplex communication over the same cable.. Optionally also the power can be supplied over the same cable for the display or camera subsystem. There are proposed Connectors and Cables to ensure interoperatibility between the connected systems, based on RJ45 / CAT5 or Rosenberger HSD /Leoni DACAR 538.

• Touch Screen kit Flyer
• APIX Industrial - Standard Connectivity for industrial display applications
• APIX Industrial Pinout

The Si3452 is the industry’s most highly integrated quad-port PoE PSE (power sourcing equipment) controller. It supports PSE systems complying with IEEE’s existing 15 W per port PoE standard, as well as the recently-ratified 30 W per port “PoE+” standard. 
The Si3461 is a single-port, IEEE 802.3at D4.2 compliant, Power over Ethernet (PoE) and PoE+ PSE controller IC. The Si3461 and its comprehensive reference design simplify development efforts, reduce system costs, and eliminate specification compliance risks for designers of a broad range of systems with embedded Ethernet ports requiring the higher power capabilities of IEEE’s new PoE+ standard.

• Si3452, Si3453 Quad Port PoE+ PSE Controllers
• Si3461 Single Port PoE+ PSE

e2v announced the production of a 10-bit 2.5 Gsps analogue to digital converter incorporating 5GHz analogue input bandwidth for operation over the full L-band and S-band frequencies; the first in a family of pin-compatible 10-bit analogue-to-digital data converters (ADCs).

e2v’s EV10AS150ATP Series provides 10-bit 2.5 Gsps performance of 60 dB spurious free dynamic range (SFDR) and 52dB of Signal to Noise Ratio (SNR), IMD3 of 60dBc and an Effective Number of Bits (ENOB) of 8.1 bits at an unprecedented 2.5 Gsps for direct sampling in intermediate and high RF sampling applications including: high speed test instrumentation, automatic test equipment (ATE), high speed data storage, software defined radio, radar and flight simulators and wideband satellite receivers. Analogue and mixed signal designers now have the ability to process instantaneously 1GHz of IF analogue signal without the need for multiple down-conversion stages. Datasheet: EV10AS150ATP

Optimized for power efficiency, the QuickSense Si1102 proximity and Si1120 proximity and ambient light  sensors enable touchless human interface sensing with superior detection range. These sensors are ideal for applications that can benefit from system power savings, tamper detection/proofing, motion sensing and gesture interpretation.

When paired with the C8051F700 and C8051F800 touch sense microcontrollers (MCUs), the QuickSense family of products enables smart motion sensing, giving designers a complete array of human interface technologies to improve the end-user experience.

Human Interface Solution Guide

Our offerings include multi-standard, multi-stream, and multi-resolution encoders, decoders and transcoders, for seamless migration from analog to HDTV broadcast. Our multi-standard support allows MPEG-2, H.264 and VC-1 formats to coexist side-by-side, each optimized for their own application domains, while our transcoders provide seamless content exchange between these domains without loss of fidelity.
Our portfolio of client products comprises audio/video encoders, transcoders and decoders for the home entertainment market. Our SoC and coprocessor solutions for set-top boxes and digital recorders incorporate our compression technology for content redistribution and archival. 

Any Content...Anywhere

Available in pin-compatible wired and Wi-Fi versions, the family now includes the Ethernet RCM5760 and Wi-Fi RCM5650W.  The new modules offer increased memory for data intensive applications such as building automation and security applications where it is necessary to store large amounts of data.  The products also allow a customer to wirelessly update firmware from anywhere an Internet connection is available to reduce maintenance costs. 
The MiniCore family provides a rich embedded feature set on an ultra-compact mini PCI Express form factor.  Its small size makes it easy for customers to place wired or wireless network connectivity anywhere on a mother board.  The family includes the pin compatible and interchangeable wired RCM5700, Wi-Fi RCM5600W, wired RCM5760 and Wi-Fi RCM5650W.  Systems developers can easily interchange MiniCore family products to tailor connectivity for any given application.

• RCM5600W
• RCM5700

Redpine Signals announced the the integration of ultra low power 802.11n Lite-Fi™ SoC products with the Analog Devices’ Blackfin processor, enabling a complete video streaming solution with 802.11n Wi-Fi® connectivity. The integrated solution includes the Blackfin ADSP-BF561 and the Redpine 802.11n module RS9110-N-11-04. The Redpine RS9110 802.11n chipset is interfaced to the Blackfin processor via a memory mapped interface. A uClinux™ operating system runs on the processor and the solution demonstrates full throughput and compliance to the single stream modes of 802.11n, including WPA2 security modes. With minimal host overhead, the integrated platform enables a wide variety of applications such as multimedia equipped handheld devices and Media boxes. Datasheet: RS9110-N-11-04

Features :

• Fanless design
• 5.7"; 8"; 10,4"; 12,1"; 15"; 17"; 19" High Brightness TFT LCD with resolution of 640x480; 800x600; 1024x768; 1280x1024
• Intel ATOM N270 1.6 GHz processor, FSB 533 MHZ
• NEMA 4/ IP65 Compliant front panel
• Sealed resistive touch screen
• One 200-pin SO-DIMM socket, up to 2GB DDR2 533 MHz SDRAM
• DC 11~28V wide-range power input

Applications:

• Automated equipment
• Factory automation
• KIOSK

• AHM-6057
• AHM-6087
• AHM-6107
• AHM-6127
• AHM-6157

Qseven is a compact (70x70mm² only) and open COM standard primary focusing towards mobile and ultra mobile applications. It ideally supports todays as well as future CPUs and chipsets.

• Conga Qseven description   
• Conga-QKIT  -  Reference Starter Kit Qseven
• Qseven Mobility Kit  -  Eval kit for all kind of mobile applications

Listing of all lenses available off the shelf for the Seoul Semiconductor Acriche series.

Inductor selection in high current core power applications is based on a need for high peak current ratings and low high frequency losses. These two requirements lead designers in different directions resulting in a compromise solution. Designers are forced to select low inductance values to reduce inductor size (and ensure fast transient responses which results in high ripple currents needing to be absorbed by the inductor increasing losses) or select higher inductance values to reduce the ripple current and losses - but at a sacrifice of inductor size, efficiency and transient responses.

• Inductors for Core Power Applications
• High Frequency Inductor Catalog

W+P PRODUCTS launched 7 new series tactile switches with high safeguarding against failure. The new product line (series 505,506,508,514-517) provides a wide range of sizes and various options. Four new series are miniature tactile switches, which need only little space on the PCB. Various fitting caps are available as well. The mini switches require an area on the PCB of only 2.9 x 4.00 mm, the minimal component height is 1.5 mm. The maximum size of the switches’ footprint is 12 x 12 mm, the maximum component height is 13 mm.

Datasheets: 505, 506, 508, 514, 515, 516, 517

600W Medical Power supply having 150W Four Isolated Modular Output ,AC or DC Input.

• 5”X3”X1U footprint
• High Power Density 25W/In3.
• Efficiency up to 89%.
• Only 0.6kg-100W/Kg.
• Remote Current /Voltage Programming.
• Accurate Current Sharing.
• EN61000-3,EN61000-4,EN550022-B EMC standard.
• UL60601 safety approval.
• High reliability

Datasheet
Overview 600W Configurable Power 

FSP launched the brand new external power supply – Slim Adapter! As its name, Slim Adapter emphasizes on the features of “slim, thin and mini” to challenge the notebook adapter and the ultimate in consumer’s taste! With the increasing consumers’ demands for thin and pretty 3C products, the 3C industry tends to design smaller and thinner products. In addition to the improvement of the efficiency, many large manufacturers focus on development of product miniaturization and sophistication. The minimized square measure of FSP’s brand new Slim Adapter series is only 9.5cm x 5.0cm in length/width. Its size is even smaller than a poker card and its thickness is just 1.65cm. Slim Adapter perfectly meets the market trend of slim, thin and mini. Once again, FSP creates a miracle in the power supply industry!   Read more