Atmel introduced the next generation of its general-purpose ARM®-based embedded microprocessors (eMPUs) optimized for use in industrial applications. With the release of the SAM9M11 and SAM9G46 devices, Atmel is delivering tailored solutions for industrial embedded systems that require secured connectivity and authentication of applications via implementation of hardware encryption. The highly-integrated ARM-based devices—ideal for industrial and building control, HVAC systems, POS terminals, alarm systems, printers and medical equipment—feature an integrated hardware encryption engine that supports the leading industry standards, and comes on top of a true random number generator which passes the NIST Special Publication 800-22 and Diehard Random Tests Suites. Datasheet: AT91SAM9M11, AT91SAM9G46

FTDI announced the launch of a range of VNC2 evaluation modules (V2DIP-x), a VNC2 evaluation kit (V2-EVAL) and a VNC2 debug module. These modules are designed to help designers quickly develop embedded USB 2.0 Host/ Slave designs based on FTDI’s recently announced Vinculum VNC2 devices. VNC2 is a user programmable dual USB 2.0 Host/ Slave intelligent SOC controller featuring a customised 16 bit MCU core, 256kByte e-Flash program memory and 16kByte of SRAM data memory. VNC2, and its associated modules, are aimed at designers wishing to add USB connectivity while implementing their own custom application firmware. Datasheets: FTDI_Brochure, V2DIP2_48, V2-EVAL 

Silicon Labs has expanded its popular ISOpro™ family to include ISOdriver isolated gate drivers that support up to 5 kV isolation ratings. Silicon Labs’ new 5 kV-certified Si82xx isolated gate drivers reduce cost and complexity for safety-critical industrial systems and universal-powered systems with 120/220 volt supplies. Target applications include isolated switch mode and uninterruptible power supplies, test and measurement equipment, robotic assemblies, industrial drives, industrial and electric vehicle motor controls, battery and solar inverters, wind turbines, air conditioning systems, plasma displays and electronic lighting ballasts.

• Datasheets : Si8220/21  -  Si823x
• Learn why digital isolators enable the replacement of optocouplers

e.g. AK5394A : Highest Performance Flagship Stereo ADC

• DR, SNR:  123dB
• THD+N:  -110dB
• Sampling rate: 1kHz to 216kHz
• Flat noise foor to fs/2 at 192kHz
• Stop-band attenuation: 120dB
• Defeatable digital high-pass flter and calibration for offset cancellation
• 28-pin SOP package

• AKM Audio ADCs
• Product Guide Analog and Mixed Signal ICs

The A29160 is a 16Mbit, 5.0 volt-only Flash memory organized as 2,097,152 bytes of 8 bits or 1,048,576 words of 16 bits each. The 8 bits of data appear on I/O0 - I/O7; the 16 bits of data appear on I/O0~I/O15.This device is designed to be programmed in-system with the standard system 5.0 volt VCC supply. Preliminary datasheet: A29160

Seoul Semiconductor achieved a luminous efficiency of 100 lm/w in February, and the company began to put the product into mass production in April and it also recently succeeded in achieving 150 lm/W.

The mass production of 150 lm/W is scheduled to begin by the end of the year and Acriche is more useful than halogen lamps, incandescent light bulbs and fluorescent lamp. The European Union enforced the ban on the sale of incandescent light bulbs of more than 100 watts in September last year and legislated against the use of the existing inefficient electric light bulbs in all countries in the future.

Read more

5008 – SCHURTER releases C8 type appliance inlet with line filter for protection class II.  SCHURTER’s latest power entry module with EMI Filter, the 5008 family, is built compact and provides maximum electrical power density. The unit offers optimal EMC filter performance and speeds assembly with efficient snap-in mounting.

• IEC 60320-1 appliance inlet, Type C8 including standard or medical line filter
• Max. nominal current: 2.5 A at 250 VAC, 6 A at 125 VAC, ENEC and UL approved
• Screw-on and snap-in mounting

Datasheet

The SCHURTER Sine Wave Filters series FMAC SINE and FMAC SINE DCL are designed to convert output voltage wave forms produced by PWM frequency converters into low distortion sine wave forms for motor drive and power transformation applications. The Sine Wave Filters are designed for use with 500 VAC installations and currents from 4A upwards. They are suited to a wide variety of applications including frequency converters in uninterruptible power supplies, elevators, heating-, ventilating- and air conditioning systems, traction and conveyer systems.Datasheets: FMAC SINE, FMAC SINE DCL

The Vox products are leading edge technology configurable 600 watt power supplies. The product itself is 3 x 5 inches in size and can deliver 600 watts with up to 4 separate isolated outputs, each output module can deliver a maximum of 150 watts.
The Nevo products are made up of 4 different front end AC sections i.e. Nevo600S(Standard – EN60950 Approvals), Nevo600M (Medical – EN60601 Approvals), Nevo+600S (Standard with higher power specification at low I/P AC levels), Nev0+600M (Medical with higher power specification at low i/p AC levels. There are presently 4 O/P modules available which slot into the front ends i.e.5V, 12V,24V & 48V. Each O/P module has a voltage trim range which allows the customer trim the voltage to any level from 1V5 to 58V.

Datasheets :

• NEVO600S
• NEVO+600S
• NEVO600M
• NEVO+600M