|
Components & Applications
|
 |
| mini PCI Express Disk-On-Module mini XDOM - m100 |
 |
| |
 |
|
There are two different designs for new XDOM series; model XDOM 100 and model mini XDOM m100. These PCIe SSD models are designed to meet the needs for industrial control applications and embedded systems. The model m100 is a solid-state disk module that is designed to accommodate mini PCIe form factor and complies PCI Express interface signals. CoreSolid Storage solid-state disk module uses highly reliable SLC flash memory chip with extreme program/erase frequent cycle durability and perform long data retention which is must features for industrial embedded board customers.
Despite the size designed for limited embedded system space, model m100 has achieved high capacity 64GB memory with 85GB/sec R/W speed. With our innovative system design, we have outperformed not only industrial IDE/SATA DOM but also Compact Flash performances.
Product Brief
|
| |
|
To touch or not to touch
|
 |
| |
 |
|
Whether your application is gesture or touch-based, the QuickSense portfolio
of highly accurate and fast-response touch, proximity and ambient light sense
devices offers a more sensitive, better performing and lower power alternative
to existing sensing solutions. Silicon Labs makes it easy to program these sensing devices with the QuickSense Studio development software.
|
| |
|
Software-defined silicon
|
 |
| |
 |
|
XMOS bases its technology on XCore, a compact, event-driven, multithreaded
processor. This 32-bit RISC processor supports as many as 8 threads and is
integrated with support resources into the XCore tile building block.
Multithreading permits concurrent processing of distinct functions, ranging from
I/O interfaces to complete software applications. With as much as 400 MIPS per
tile, the XCore engine has the performance to implement multiple complex
real-time hardware and software functions.
|
| |
|
USB 2.0 to serial UART converter cables
|
 |
| |
 |
|
Future Technology Devices International Limited (FTDI) unveiled the TTL-232RG
family of USB to TTL serial UART converter cables. The cables feature a USB to
serial converter PCB encapsulated within a standard type 'A' USB connector with
a wire-ended asynchronous UART output. A range of cables are available to for a
variety of voltage I/O levels including +1.8V, +3.3V, +5.0V or at user specified
levels, to provide UART interfacing to devices such as MCUs, CPUs or FPGAs at a
range of voltage levels.
Range of cables:
- TTL-232RG-VSW3V3-WE: USB cable with wire-ended +3.3V logic level UART connections and +3.3V / 50mA rated power output.
- TTL-232RG-VREG3V3-WE: USB cable with wire-ended +3.3V logic level UART connections and +3.3V / 250mA rated power output.
- TTL-232RG-VREG1V8-WE: USB cable with wire-ended +1.8V logic level UART connections and +1.8V / 100mA rated power output.
- TTL-232RG-VSW5V-WE: USB cable with wire-ended +5.0V logic level UART connections and +5V / 450mA rated power output.
- TTL-232RG-VIP-WE: USB to wire-ended UART output at user specified logic levels.
- All cables are FCC / CE compliant and support operation between -40°C to +85°C.
TTL-232RG Datasheet
|
| |
|
Atmel expands its maXTouch solutions to large screen applications
|
 |
| |
 |
|
Atmel announced a multi-chip solution to enable capacitive multi-touch
functionality for large format touchscreens up to 15.6”. The maXTouch microcontroller family is extended with a chipset aimed at touchscreens for emerging consumer products including touch-enabled tablets, smartbooks, mobile internet devices (MIDs), netbooks and PC notebooks.
A master device coordinates the inputs and sensing data from several maXTouch MCUs to enable and merge the multi-touch functionality across different areas of a large touchscreen.
The 4-chip solution supports screen sizes from 8 to 15-inch, while screen sizes from 5 to 10.1-inch can be addressed by a 3-chip solution. Both solutions support stylus and up to 16 fingers with 9mm of finger-pinch separation, with a fast touch report rate in excess of 150Hz.
|
|
When to Use a Clock vs. an Oscillator
|
|
| |
 |
|
A wide range of timing solutions are available, including crystal oscillators
(XO), voltage-controlled crystal oscillators (VCXO), and clocks. No one size
fits all strategy applies when it comes to component selection. Picking the
right device for a particular application is dependent on a number of factors,
including whether or not the clocks must be synchronized to an externally
provided reference clock, the system architecture of the processor and high
speed serial data transmission ICs, and the frequency and jitter requirements of
the end application. In high performance applications, low jitter and low phase
noise are critical given that they have a direct impact on the bit-error rate in
high speed serial data transmission applications and the signal-to-noise ratio
of analog to digital data converters. This white paper describes the key
criteria in selecting an XO vs. a VCXO.
|
| |
|
Step-down DC/DC converter with 4 High PSRR LDO's
|
 |
| |
 |
|
The AAT2614 is a multiple rail power management integrated circuit. It
integrates a 600mA switching regulator and four fully integrated 300mA low
dropout (LDO) regulators in a small Pb-free 3mm x 3mm, 20-pin TQFN package or in
a 1.65mm x 1.65mm, 16-bump CSP-0.4 package making it ideal for space-constraint
systems.
Datasheet AAT2614
|
| |
|
|
Z5 Compact High Power-LEDs, 110 lm@350 mA
|
 |
| |
 |
|
Z-Power LED Z5 series is very small size (3.5*3.5*2.0mm), ceramic-based
package, and large radiation plate make heat management of Z5 easy. The Z5 offers a high output of >110lm @ 350 mA and is available in pure and warm white. In the near future, the Z5 will also be available in blue, green, amber and red.
Applications :
- General lighting
- Channel lighting
- Backlight signage
- Architectural lighting
- Decorative lighting
- Torch, Portable and Reading lights
- Traffic lights
- Automotive lighting
Specs :Pure White * Warm White
|
| |
|
Acriche A4(100lm/W), A7 and Z-Power LED products are in the spotlight for lighting applications
|
|
| |
 |
|
Seoul Semiconductor will launch a new series of Acriche, the main product
optimized for lighting applications, which will further boost the increasingly
rapid growth of the LED lighting market. In the case of Acriche A4 Series Cool
White products, their luminous efficacy is maximized to 100lm/W. Acriche A6 (1
W) and A7 (4 W) series are LED products that can be applied to general lighting
fixtures in a variety of ways, and they are characterized by the fact that they
can be optimally designed by drastically reducing their size compared to the
existing Acriche products (18 X 12 mm).
Read more
|
| |
|
Board-to-board 3-way springloaded connector used as a RF interface
|
 |
| |
 |
|
Low profile 3-way spring-loaded connector with limited board spacing. This
connector is connecting to printed circuit boards with three 3.5mm height
spring-loaded contacts. Maximum stroke is 1.0mm. Product is supplied in tape and
reel packaging. The challenge was to replace a fragile stamped and formed coax
connector with a very low profile high-reliable connector and uses minimal
space.
Product Brief
|
| |
|
Circuit Breaker TA35 Spots Factory Mounted Protection Cover
|
 |
| |
 |
|
SCHURTER introduces new protection covers for its popular TA35 series Circuit
Breaker for Equipment. The 2-pole circuit breaker is now available with factory
mounted covers in addition to its range of covers supplied separate for customer
installation.
Cover options include transparent cover with or without collar, or collar only. These value added features are new to circuit breaker design, reducing parts count and providing a cost savings alternative to conventional products requiring secondary steps for IP protection.
Datasheet
|
|
ESD Suppressors protect high-speed data from ESD damage
|
 |
| |
 |
|
Ultra-Low Capacitance & Low trigger Voltage ESD Protection in a Discrete 0402 SMD Device
- Maintains Signal Integrity… The ultra-low capacitance (0.05pF typical) leaves high speed data circuits untouched so ICs can function as designed.
- Protects IC’s from ESD Damage… Low trigger voltage and clamping voltage delivers enhanced ESD Protection of very sensitive ICs, The polymer based Voltage Variable Material reacts in less than 1ns to suppress damaging ESD strikes away from the IC Allowing for continued operation.
- Provides Long Lasting Protection… The robust design withstands over 1,000 ESD strikes under normal operating conditions, allowing continued protection over the lifetime of the product.
- Space Savings… The discrete 0402 SMD design saves precious PCB space while giving designers flexibility in device placement for superior ESD protection schemes.
- Environmentally Friendly… Cooper Bussmann offers ESD suppressors that are RoHS compliant, and halogen free, making them a great choice for any global application.
- High reliability performance… Tested to meet automotive specifications (AEC-Q200 Rev C standard for MLV)
- Datasheet PS04LTVA ESD Suppressor
|
|
DC filters for use in DC-side of inverter in Photovoltaic systems
|
|
| |
 |
|
Modern solar inverters, that use MPP (maximum power point) trackers, generate
disturbances into both the grid’s AC power line, as well as the DC side of the solar module.
An AC filter is normally used on the grid’s AC power line, but the noise generated on the DC side tends to be overlooked. EMC standards EN 61000-6-3 and EN55014-1, however, also put limits on the noise generated from lines not connected to the grid, such as for example the line to the solar panels. Meeting these limits can be achieved by using a DC filter on the DC side of the inverter.
Datasheet FMER_SOL
|
|
DIN41612 connectors for reflow soldering from EPT
|
 |
| |
 |
|
The press-fit and solder connectors of the connector manufacturer ept have
been supplemented by a reflow solder version of the type C male connector
(according to DIN 41612 / IEC 60603-2). This male connector in THTR technique
(Through Hole Technology Reflow) uses a high temperature resistant plastic to
fulfill the requirements of J-STD-020D (Moisture/Reflow Sensitivity
Classification for Nonhermetic Solid State Surface Mount Devices). The
connectors are designed for lead free reflow solder process with peak
temperatures up to 260°C.
DIN connectors are used in various applications with different termination methods. The DIN type C connectors are also available in press-fit technology or other solder technology.
Product Brief
|
| |
|
|
|
|
LED Power Supplies
|
 |
| |
 |
|
Linkcom produces LED Drivers designed for LED Signage, Indicator lights,
indoor/outdoor lights and other related high-power LED products. All products
have the capability to be custom-built to satisfy customers' need for the
protections of classification IP66, sealed against dust and powerful water jets.
Linkcom also provides controlled-current and controlled-voltage output power and
longer product life specifications upon request. All of the high-power products
are CE-, UL- and PSE-approved.
LED power driver
|
| |
|
DIN Rail SMPS single-output DN Series
|
 |
| |
 |
|
COTEK DN Series of DIN rail-mountpower supplies comprising 10, 20, 40, 60 and
100 Watt single output models, offer efficiency levels of 83~88 %. The series
can accept a universal input range from 88 VAC to 264 VAC and provides the
output voltage variants of 12, 15, 24 and 48 VDC. Capable of operating over a
wide range of temperatures from -20 degrees C, the DN series can provide full
power output to +50 degrees and with derating to +70 degrees C. The DN supplies are approved to EN60950-1 for ITE and UL508 for industrial applications. Also, approved to UL1310 (only the model 24V and 48V), making them compliant to NEC Class 2 rating. Additionally, the units meet EN61000-3-2,-3 and Level B performance for conducted emissions.
|
| |
|
|
