|
Components & Applications
|
 |
| 1,6A Linear Li-Ion Battery Charger in 3 x 3 TDFN |
 |
| |
 |
|
The AAT3698-1/-2 BatteryManager™ is a single-cell Li-Ion/Li-Polymer battery charger IC designed to operate from a USB port or AC adapter with an input voltage of up to 7.0V. For increased safety, the AAT3698-1/-2 also includes over-voltage input protection (OVP) up to 28V.
Targeting : portable electronic devices including cellular phones, GPS navigation systems, portable media players and general hand-heldconsumer devices.
Product Brief AAT3698
|
| |
|
Wireless Remote Control on a Chip
|
 |
| |
 |
|
New Sub-GHz EZRadio® RF Transmitter IC Simplifies RKE, Garage Door Opener, Remote Control, Home Automation and Security System Designs.
The Si4010 RF transmitter is the industry’s first single-chip remote control IC requiring only one external bypass capacitor, a printed circuit board, battery and external case with pushbuttons to create a complete wireless remote control. Based on a patented crystal-less architecture, the Si4010 achieves ±150 ppm carrier frequency accuracy over the commercial temperature range and ±250 ppm over the industrial temperature range – twice the accuracy of traditional surface acoustical wave (SAW)-based transmitters – without using an external crystal.
Promotional Pricing :4010-DKFF 434 now available at 150 EUR + VAT
|
| |
|
NVE Introduces World’s Smallest Isolated CAN Transceiver
|
 |
| |
 |
|
NVE announced an expansion of the IsoLoop IL41050TE isolated Controller Area
Network (CAN) transceiver family with the introduction of the 16-pin narrow-body
SOIC IL41050T-3E.
In both package versions, transceiver and isolation functions are integrated in a single device with improved performance and reduced chip count compared to discrete transceivers and traditional optocouplers. IL41050T transceivers fully comply with the ISO 11898 CAN standard and de facto industry standards, and provides an isolated interface to 3 V or5 V microcontrollers.
Designed for harsh CAN and DeviceNet environments, IL41050T transceivers have a –55°C to 125°C operating range, transmit data dominant time-out, bus pin transient protection, thermal shutdown protection, short-circuit protection, 2500 V isolation, and typical transient immunity of 30 kV/µs. Unique edge-triggered inputs improve noise performance. The parts are UL 1577 and IEC 61010-2001 approved. Unlike optocouplers or other isolation technologies, IsoLoop isolators have indefinite life at high voltage.
Datasheet IL41050
|
| |
|
Supertex introduces Off-Line, scalable output, inductorless switching regulator
|
 |
| |
 |
|
SR10 Meets Low Power Standby Requirements in “Always On” Applications
The SR10 is a capacitor-coupled, switched shunt regulator for direct AC line operation. Its standby power consumption is very low, making it ideal for “always on” standby applications like utility meters, audio/video, or white goods. The IC operates at high efficiency while requiring no magnetic components or high voltage electrolytic capacitors. Its output can be internally programmed at 6V, 12V or 24V, or can be externally adjusted with a feedback divider from 6V to 28V. Output current can be scaled via a safety-rated, series coupling capacitor on the AC line. Typical standby power consumption is less than 20mW. The SR10 also uses the safety-rated, high voltage capacitor to meet voltage safety standards for the load. The SR10 solution also meets class B limits for conducted emission.
Product Brief
|
| |
|
Torex Introduces New Transient Voltage Suppressor
|
 |
| |
 |
|
Torex has developed a transient voltage suppressor for the protection of
electronic devices from static electricity.
Two types are available to match the application: the two-element XBP06V4E2HR-G and the four-element XBP06V4E4GR-G. Both types are able to withstand an 8kV discharge (based on IEC61000-4-2). Leakage current is a maximum of 1.0µA (at VRM = 5V). Packages are the USP-3 (XBP06V4E2HR-G) and the USP-4 (XBP06V4E4GR-G). The use of these small packages makes this product well suited for portable communication devices, which are becoming increasingly smaller and lighter.
The XBP06V4E2HR-G & XBP06V4E4GR-G features include: peak pulse power of 70W@ tp = 8/20µs; leakage current of 1.0µA max. @VRM =5V; housed in small packages: USP-3 (1.2 x 1.2 x h0.6mm) or USP-4 (1.2 x 1.6 x h0.6mm).
Datasheets XBP06V4E2HR-G & XBP06V4E4GR-G
|
|
Amic NOR Flash products compatible to A29 flash, offer full ID code matching
|
 |
| |
 |
|
AMIC released two new NOR Flash devices, the A29801 and the A29160. The new additions to AMIC’s large 5 Volts NOR Flash product family is offering full compatibility with the leading industry A29 series. Not only the package but also pin-out, the functionality, sector size and the device ID codes are all in compliance with the industry standard.
The A29801 is offering 8Mb, the A29160 16Mb. The orientation is either x16 or x8 bits. Top and bottom boot block versions are available in 48pin TSOP, 44pin SOP and in 48ball TFBGA package options. The availability in commercial temp range has started. Versions in 55ns access time and industrial temp range are following in the months to come.
|
| |
|
CFAST, Compact Flash Formfactor with SATA Interface
|
%20low.jpg) |
| |
 |
|
The CFast™ format is a ratified Compact Flash Association and SATA-IO standard offering the same dimensions as standard Compact Flash but with a SATA interface. With its small footprint and rugged shielded case design, the CFast™ format is an ideal fit for embedded solid state storage applications (e.g. small HDD replacement, boot module for virtualization applications, performance caching, etc.) that require a very small storage footprint, lower capacities, and high tolerance to extreme environmental conditions. Because the CFast™ solution is designed for fixed and removable applications, it makes an ideal solution for applications requiring frequent field updates/upgrades or any other situation where frequent handling of the storage device may occur.
|
| |
|
CMX7163 Wireless Data QAM Modem IC
|
 |
| |
 |
|
The device is a complete baseband modem system delivering high performance
and high spectral efficiency QAM for narrowband applications. These include M2M
systems over dedicated channels, digital Software Defined Radio (SDR),
high-speed wireless data and SCADA systems.
The half-duplex device, which is suitable for 6.25kHz, 12.5kHz and 25kHz bandwidths, operates up to 96kbps in 25kHz bandwidths, featuring channel estimation and equalization.
The device is suitable for interfacing to superheterodyne receivers (e.g. CMX992) or direct conversion designs (e.g. CMX994) providing performance compatible with stringent regulatory standards such as EN 301 166, EN 300 113 and EN 302 561. The transmitter interface is compatible with the proven CML Cartesian loop technology (CMX998).
Datasheet CMX7163
|
| |
|
High Speed Memory Buffer for HD Video Applications
|
 |
| |
 |
|
The AL460A-7-PBF and AL460A-13-PBF modules are designed to assist companies
in evaluating and validating the AL460A HD-FIFO chip for use as a high speed
memory buffer in HD video applications. Each module has two embedded AL460 HD-FIFO chips operating in parallel, expanding the bus width to 32-bits. Control signals and data bus signals are available on two 50-pin connectors. An HSMC Adaptor Board is available for interfacing the modules with Altera's Cyclone III FPGA Starter Kit for further solution verification/validation.
|
| |
|
Lowest Power Touch-Sense Microcontrollers
|
|
| |
 |
|
Like other members of the F9xx MCU family, Silicon Labs’ new ultra-low-power F99x and F98x MCUs offer the industry’s lowest power consumption in active mode, sleep mode and deep sleep mode. In addition to consuming the lowest current per MHz, a common industry specification, the new MCUs contain an integrated low drop-out (LDO) regulator that keeps the current constant at 150 microamps per MHz over the entire operating range of 1.8 to 3.6 V. The on-chip LDO regulator helps reduce the MCU’s drain on the battery by 50 percent compared to competing products, which extends battery life and makes the ultra-low-power F99x and F98x MCUs ideal for battery-powered applications.
|
|
5 kV digital Isolators offer reliable Upgrade for traditional Optocouplers
|
|
| |
 |
|
The new 5 kV Si84xx digital isolators provide a smaller, faster and more
reliable isolation solution than optocouplers without the wear-out mechanisms,
aging effects or temperature dependencies that plague optocoupler-based designs.
They also offer best-in-class electromagnetic immunity among digital isolation
solutions.
The 5 kV Si84xx digital isolators target industrial automation and drives, motor control and medical device applications that require robust operation and high levels of protection. The Si84xx digital isolators are also ideal for systems powered from 220 V mains supplies such as isolated ac-dc and dc-dc power supplies, solar power inverters, lighting systems, data communications, and test and measurement equipment.
|
| |
|
USB SuperSpeed 3.0-to-SATA controllers
|
 |
| |
 |
|
The new PLX trio includes the OXU3102, OXU3101 and OXU3100, which provide the
highest performance of direct attached storage (DAS) products using the emerging
USB SuperSpeed standard.
- PLX's OXU3102 DAS controller targets the "prosumer" (professional- and power-consumer) market segment and combines USB SuperSpeed's 5Gbps interface with dual high-speed SATA hard disk drive (HDD) ports.
- The midrange OXU3101 for portable computing and desktops offers the same features but bridges to a single SATA HDD. Both the OXU3102 and OXU3101 feature integrated AES-256 encryption/decryption capabilities to ensure the highest level of data security.
- The OXU3100 provides the essential features for basic SuperSpeed-to-SATA designs.
|
| |
|
|
|
New Neutral White Light LED arrays
|
 |
| |
 |
|
New Portfolio Additions Deliver High Efficacy 4100K Color Temperature For
Interior and Exterior Applications. Neutral white is the latest addition to Bridgelux’s highly efficient ES Array Series offering light output options of 400, 800 and 1200 operational lumens. These new products deliver an increase of more than 40% in energy efficiency over previous neutral white product generations while dramatically reducing the price per lumen. The neutral white RS Array delivers 3400 operational lumens, complementing the existing RS Array product line which offers 3100 lumens in warm white and 4500 lumens in cool white.
ES & RS Arrays
|
| |
|
LEDs and Forged Heatsinks... A perfect fit !
|
 |
| |
 |
|
With the ability to produce small and lightweight products with great thermal
performance, forging technology will be very helpful for LED lighting
industry.
- Forging can produce round and other non-linear shapes that are preferred for LED applications.
- Cooliance specializes in heatsinks with round pin arrays that optimize thermal performance when air flow is limited.
- A forged heatsink offers improved thermal performance.
- Heatsinks can be forged in copper and aluminum.
Overview
|
| |
|
Appliance Inlet DC Filter, ECO Design, Front- or Rear Side Mounting
|
 |
| |
 |
|
- Screw-on mounting, front or back side
- PCB snap-in version
- MOLEX HCS-125 connector
________________________________________________
- Screw-on mounting, front or back side
- Quick connect terminals 6.3 x 0.8 mm
- AMP Universal MATE-N-LOK or MOLEX MLX
_______________________________________________
- Snap-in mounting
- with wires (stranded)
- AMP Universal MATE-N-LOK or MOLEX MLX
________________________________________________
Datasheet 5003
|
| |
|
Automotive Connectors
|
 |
| |
 |
|
JAE has provided the automotive industry with solutions to complex design
requirements. Their connectors are used in many areas of a vehicle, from
conventional body and chassis applications to the most technologically advanced
safety systems.
- Power Train Systems
- Safety Systems
- Body/Chassis Systems
- Information/Communications Systems
Automotive Connectors Catalogue
|
|
Supercapacitors replacing batteries
|
 |
|
Automotive Quartz Crystals And Clock Oscillators
|
 |
| |
 |
|
Quartz crystals are used in a wide range of automotive applications. The High
Q factor of the quartz means that tight stabilities can be achieved; this is key
to ensuring microprocessor timing circuits work correctly within customer’s designs. Crystal Clock Oscillators are a “plug and play” quartz crystal and are used in many automotive applications. Our range includes 5 x 3.2mm surface mount packages with 3.3V and 5.0V supply voltage options.
IQD offers an extensive range of Automotive Quartz Crystals covering both surface mount and leaded devices that satisfy most applications; many devices are suitable for custom designs
IQD’s comprehensive range of Automotive Crystals are qualified to AEC-Q200 standard and can be released to TS16949 where required.
Full PPAP documentation (levels 1 to 5) is also available if requested. Standard operating temperature ranges are –40 to +85°C and –40 to +125°C.
Our package styles tend to follow those of mainstream products but with enhanced performance capabilities.
|
|
Magnetically Compensated Choke, compact
|
|
| |
 |
|
Schurter expands its magnetically compensated choke range; current ratings
from 300mA to 10A and rated inductance from 0,5 - 100 mH. The rated voltage of the DKFP compensated chokes is 250 VAC. The chokes are designed for temperatures of between -40°C and 125°C.
Datasheet
|
| |
|
USB0508 - Ultra Low Capacitance Multi-Line ESD Protection
|
 |
| |
 |
|
Available in a bidirectional or unidirectional configuration, the 3 pF, 500
Watt (8x20µs) series of devices are ideally suited for transient protection of high frequency data lines and signal interfaces. Typical applications include data communication interfaces such as Gigabit Ethernet, USB, RS-485, FireWire and SCSI.
Designed to protect against the transient environments of IEC 61000-4-2(ESD) and 61000-4-4(EFT), all devices are tested up to 25 kilovolts ESD contact discharge. At higher operating frequencies or faster edge rates, insertion loss and signal integrity are a major concern. The USB0508 series has a 3pF capacitance per I/O measured to ground. This series in conjunction with passive components integrated into a TVS/filter network can be used for EMI/RFI protection. Packaged in the SOIC-8 plastic case, this device should be placed near a connector or a sensitive IC component.
Datasheet
|
| |
|
|
|
Miniature, 3W SIP Encapsulated AC/DC Supply
|
 |
| |
 |
|
Key Features :
- 3W Output Power
- Miniature Encapsulated Case
- Universal 85 - 264 VAC Input
- Wide 100 - 400 VDC Input
- IEC Safety Class II
- Low Leakage Current
- Miniature SIP Package!
Datasheet MPS-03 Series
|
| |
|
Enclosed SMPS single output with PFC, from 75W to 3000W
|
 |
| |
 |
|
The AK series of switching power supply are available in models from 75 to
3000W.
Features :
- durable design that installs easily in compact spaces
- AC input range 90-264 VAC with active PFC 0,98 typical
- high efficiency up to 91%
- programmable output voltage from 30% to 100%
- programmable output current from 40% to 105%
- forced current sharing at parallel operation
- high reliability
- low ripple noise
- output short circuit, overvoltage, overload, overtemp protections
- compliant to EPA Energy Star requirements for external power supplies
AK - Series Overview
AK - Series Datasheets (26 pgs - 7 MB)
|
|
EOS WLT200 Medical & Commercial Open Frame Power Supplies in 3 x 5 Inch Footprint
|
 |
| |
 |
|
The M (W) LT200 Series features Universal AC inputs from 90v to 264v,
measures a mere 3 inches x 5 inches x 1.5 inches, and has a rated efficiency of
greater than 88%. It is configured in all popular single output voltages and its
flexible design allows for simple modification to alternate voltages as
required. Additionally, the M (W) LT200 Series comes with a standard 12v fan output and 5v standby output as standard and can be ordered in Class 1 or Class 2 configurations.
More...
|
| |
|
|
|
